Wilma Dripper Systems Atami

Wilma is a joint collaboration between Atami and Nutriculture and is as simple to use as a pot, but with less maintenance thanks to the timer which automates feeding.

The pots are filled with your chosen growing medium, you set the timer to the desired feeding duration and frequency, and a pump delivers nutrient solution through the drippers into the pots. Perfect if you want the familiarity of pots and the increased yields produced by plants fed little and often.

Large Origin (Wilma) 4 POT - 11L Pots - 75x75x20cm 50L Reservoir

Still hand watering? Take the fuss out of feeding with a flexible Wilma System. They’re simple to use! It’s as easy as growing in pots without the hassle of hand watering. You can use them with any growing media you like, including soil, coco, clay pebbles & rockwool! Expect to use far less nutrient solution – unused feed is recirculated back to plants to reduce waste. Wilma Systems are basically re-circulating hydroponic system. For uniform growth, you can move and rotate pots. To make life easy, you quickly check your nutrient level via the handy inspection hatch on the top tray. • Remove the hassle of hand watering • Supplied with 11 Litre pots • Great for all growing media (including soil, coco, pebbles & rockwool!) • Fast flow & 2L/h drippers included to suit all growing media • Efficient - reduce nutrient solution waste • Handy inspection hatch for checking your nutrient level • Move and rotate pots easily for even growth • Timer needed (not included) to regulate watering times - use a Grasslin Mechanical, Budget Digital or GSE Water Irrigation timer Dimensions: Wilma Large 4 Pot System • 74cm x 74cm x 40cm ( L x W x H) • Supplied with the Maxi-Jet MJ500, (pumps 500 Litres per hour) • Fits perfectly in 1.2m x 1.2m tent, like the BAY6 XL and BudBox XL Wilma Large 8 Pot System • 168cm x 74cm x 40cm (L x W x H) • Supplied with the Maxi-Jet MJ1000 (1000 Litres per hour) • Fits perfectly in 1.2m x 2.4m tent, like the BAY6 XXL and BudBox XXL All dimensions include the pots. We Recommend: To regulate watering times, you will need to buy a timer. Get a Grasslin Mechanical, Budget Digital or GSE Water Irrigation timer, depending on your growing media. Use clay pebbles as your growing media – you’ll be able to irrigate often and have a highly oxygenated root zone.

XL Origin (Wilma) 4 POT - 18L Pots - 90x90x20cm 70L Reservoir

The NEW Wilma V2 XL 4 pot system is growing in pots....the hydroponic way.

Small Wide Origin (Wilma) 8 POT - 11L Pots - 120x60x20cm 85L Reservoir

The NEW Wilma Small Wide 8 pot system is growing in pots....the hydroponic way.

Small Wide Origin (Wilma) 10 POT - 6L Pots - 120x60x20cm 85L Reservoir

The NEW Wilma Small Wide 10 pot system is growing in pots....the hydroponic way.

Large Wide Origin (Wilma) 8 POT - 18L Pots - 170 x 65cm 120L Reservoir

Wilma drip irrigation systems are designed to provide high yields in as simple a way as possible.

Available in a range of sizes to suit the modern grower, the Wilma has been developed to include:

- Improved spacing between pots
- A handy nutrient mixing tap
- Easier access to the reservoir

Wilma is a collaboration between Atami and Nutriculture.

XXL Origin (Wilma) 8 POT - 18L Pots - 115x115x20cm 150L Reservoir

The NEW Wilma V2 XXL 8 pot system is growing in pots....the hydroponic way.

XXL Origin (Wilma) 5 POT - 25L Pots - 115x115x20cm 150L Reservoir

The NEW Wilma V2 XXL 5 pot system is growing in pots....the hydroponic way.

XXL Origin (Wilma) 9 POT - 18L Pots - 115x115x20cm 150L Reservoir

A complete 9-pot Wilma Dripper Hydroponics system for small-medium grow-spaces. Great value-for-money and incredibly easy to use. Atami Wilma Dripper System - Great for beginners or experts Ideal for a 1.2m or 1.5m square tent or similar size grow-space Comes with tried-and-tested Maxi-jet MJ-1000 pump Low height an advantage where headroom is at a minimum Can be used with virtually any grow-medium - soil, coco, clay pebbles or rockwool Timer can be added for timed feedings High oxygen environment for rapid plant growth The Wilma - XXL - 9 x 18 Litre Pot Dripper System Contains: 4 bags of growing medium, 1 x Reservoir Tank, 1 x Top Tray, Big 9 x 18 Litre Pots, 1 x Maxi-jet MJ-1000, Distribution piping, Drip-lines, 9 flood drippers, 9 arrow drippers, full instructions. Required but NOT included: Timer switch Please note: Our grow systems are designed to provide years of trouble free use, having undergone rigorous testing and development. However, at One Stop Grow Shop, we believe that it's good practice to take a few simple precautions that will reduce the risk of leakages to practically zero. For complete peace of mind, secure pipework that's joined onto barbed fittings using jubilee clips or cable ties, and place run-off trays / floor secure sheeting underneath the system & reservoir. It's much better to be safe than sorry. How the Wilma System Works: The Wilma 9 x 18 Litre Pot Dripper System is a complete hydroponic dripper system for growing 9 large sized plants. Nutrient solution is held in a reservoir which is also the base of the system. A water pump is used to pump the nutrient solution from the reservoir, through the drip-lines and out through drippers inserted into each of the 9 pots which sit on a collection tray on top of the reservoir. The nutrient solution then returns to the reservoir ready to be used again. Using the Wilma System The Wilma 9 x 18 Litre Pot Dripper System is a great growing system for new and seasoned growers alike. It is ideal for making the most of a small-medium size growing environment such as a 1.2m, 1.5m or 2.0m square tent. The whole system can be put together in minutes. Simply place the Reservoir in the correct location in your grow-room, put the Top Trays on top of the Reservoir and then place the pots onto it. Install the pump and distribution piping. Fill the pots with your substrate (soil, coco, rockwool, clay pebbles). Run drip-lines from the piping to each pot and connect the correct dripper for the substrate you are using (use the flood-drippers for clay pebbles, and use the arrow-drippers for substrates with greater water retention - soil, coco, rockwool). Fill the Reservoir with 140 litres of water and mix in your nutrients, boosters and additives according to your feeding schedule. Transplant your plants into the pots and insert the drippers into the substrate in each pot close to each plant. Most growers use a 24Hr timer such as the Grasslin time-switch to switch the water-pump on and off and thereby control the feeding times. Set your programmed time-switch to the correct time, plug it into a mains outlet and switch on. Plug the water-pump into the timer. The pump will now water your plants according to the programme you have set on the timer. Most segmental timers have a minimum 15-minute on-period. For small plants in clay pebbles start with 2 or 3 15-minute feeds per day spread out through the lights-on period. For small plants in more water-retentive mediums start with 1 or 2 15-minute feeds per day. For both types of mediums, the number of feeds per day will usually need to be increased as your plants grow larger. If you're using soil, we recommend buying a 7-day timer, to allow you to feed less regulalrly. You'll find the timers you need for the job in the Irrigation Timers section. Dimensions: 115cm x 115cm x 20cm Reservoir: 150 litres

XXL Origin (Wilma) 16 POT - 11L Pots - 115x115x20cm 150L Reservoir

The NEW Wilma V2 XXL 16 pot system is growing in pots....the hydroponic way.

XXL Origin (Wilma) 20 POT - 6L Pots - 115x115x20cm 150L Reservoir

A complete 20-pot Dripper Hydroponics system for small-medium grow-spaces. Great value-for-money and incredibly easy to use. The following video is for a 4 pot dripper system, but the principle is the same for the 20 x 6 litre pot system: Atami Wilma Dripper System - Great for beginners or experts Ideal for a 1.2m, 1.5m or 2.0m square tent or similar size grow-space Supplied with your choice of growing medium Comes with tried-and-tested Maxi-jet MJ-1000 pump Low height an advantage where headroom is at a minimum Can be used with virtually any grow-medium - soil, coco, clay pebbles or rockwool Timer can be added for timed feedings High Oxygen environment for rapid plant growth The Wilma XXL Dripper System Contains: 3 x bags of growing medium, 1 x Reservoir Tank, 2 x Top Trays, 20 x 6 Litre Pots, 1 x Maxi-jet MJ-1000 Pump, Distribution piping, Drip-lines, 20 flood drippers, 20 arrow drippers, full instructions. Please note: Our grow systems are designed to provide years of trouble free use, having undergone rigorous testing and development. However, at One Stop Grow Shop, we believe that it's good practice to take a few simple precautions that will reduce the risk of leakages to practically zero. For complete peace of mind, secure pipework that's joined onto barbed fittings using jubilee clips or cable ties, and place run-off trays / floor secure sheeting underneath the system & reservoir. It's much better to be safe than sorry. The Wilma 20 x 6 Litre Pot Dripper System is a complete hydroponic dripper system for growing 20 small sized plants. Nutrient solution is held in a reservoir which is also the base of the system. A water pump is used to pump the nutrient solution from the reservoir, through the drip-lines and out through drippers inserted into each of the 20 pots which sit on a collection tray on top of the reservoir. The nutrient solution then returns to the reservoir ready to be used again. Using the Wilma XXL Dripper System: The Wilma 20 x 6 Litre Pot Dripper System is a great growing system for new and seasoned growers alike. It is ideal for making the most of a small-medium size growing environment such as a 1.2m, 1.5m or 2.0m square tent. The whole system can be put together in minutes. Simply place the Reservoir in the correct location in your grow-room, put the Top Trays on top of the Reservoir and then place the pots onto it. Install the pump and distribution piping. Fill the pots with your substrate (soil, coco, rockwool, clay pebbles). Run drip-lines from the piping to each pot and connect the correct dripper for the substrate you are using (use the flood-drippers for clay pebbles, and use the arrow-drippers for substrates with greater water retention - soil, coco, rockwool). Fill the Reservoir with 140 litres of water and mix in your nutrients, boosters and additives according to your feeding schedule. Transplant your plants into the pots and insert the drippers into the substrate in each pot close to each plant. Most growers use a 24Hr timer such as the Grasslin time-switch to switch the water-pump on and off and thereby control the feeding times. Set your programmed time-switch to the correct time, plug it into a mains outlet and switch on. Plug the water-pump into the timer. The pump will now water your plants according to the programme you have set on the timer. Most segmental timers have a minimum 15-minute on-period. For small plants in clay pebbles start with 2 or 3 15-minute feeds per day spread out through the lights-on period. For small plants in more water-retentive mediums start with 1 or 2 15-minute feeds per day. For both types of mediums, the number of feeds per day will usually need to be increased as your plants grow larger. If you're using soil, we recommend buying a 7-day timer, to allow you to feed less regularly. You'll find the timers you need for the job in the Irrigation Timers section.

XL Wide Origin (Wilma) 8 POT - 25L Pots - 190 x 90cm 180L Reservoir

Wilma drip irrigation systems are designed to provide high yields in as simple a way as possible.

Available in a range of sizes to suit the modern grower, the Wilma has been developed to include:

- Improved spacing between pots
- A handy nutrient mixing tap
- Easier access to the reservoir

Wilma is a collaboration between Atami and Nutriculture.

Why yields are bigger when using a Wilma
The Wilma is like a pot with a personal assistant!
The Wilma feeds the plants little and often, which provides the plants with more water and nutrients than if they were hand-watered
When watering once per day you can't give a plant all the water and nutrients it needs for optimum growth because you would waterlog the medium and starve the plant of oxygen.
In a Wilma the plants are provided with water and nutrients little and often,
so they are able to take up more water and nutrient and they are never over or underfed or watered,
so the Wilma produces bigger yields compared with pots. Because of the frequent watering clay pebbles can be used which allow much more air around the roots than any other growing medium -
and better access to oxygen = bigger yields.
Plants benefit from the accurate feeding of active hydroponics and you benefit from the simplicity and flexibility of growing in pots. The ideal step up from a pot.