Flora Micro GHE

GHE Flora Micro - SOFT WATER

3-part “Building Block” nutrient system: GHE Flora Series® gives the best possible balance between concentration and flexibility.

Why buy grow nutrients, bloom nutrients, a CalMag and a PK, when you can grow from start to finish with just three bottles!

Flora Series nutrients allow you to perfectly match the changing needs of your plants by varying the mix as your grow progresses: more FloraGro during growth, and more FloraBloom for flowering and fruiting: simple and incredibly effective by design.

Many nutrients claim to include everything that your plant needs for healthy growth, but unlike most competitors, the Flora Series includes not just the primary and secondary nutrients necessary for basic plant nutrition, but a full range of micro and sub- micronutrients as well – and we chelate every possible element for enhanced uptake and stability. This is why the Flora Series delivers such impressive and reliable results in specialist markets where enhanced flavour, aroma, potency, and essential oil production are vital.

The Flora Series is available with hard or soft water formulations of FloraMicro to ensure that calcium levels in your nutrient solution remain optimal preventing the lockout / deficiency problems that universal nutrients can provoke.

FloraMicro® Soft Water

Available in Hard or Soft water composition, FloraMicro is the foundation of the “building- block” system, providing micro and sub-micro nutrients and some complementary macro-nutrients. Use FloraMicro as directed all the way through growth and bloom.

How to use Flora Series®:

• Shake well before each use: GHE Flora Series® nutrients are very concentrated - see the main Flora Series® feed chart for details.
• Add each part to water separately, mix well, and rinse measuring equipment in between parts and after use.
• To ensure the best results in your area, Flora Series is available in both hard water and soft water versions: (more than 70 mg/L calcium, use FloraMicro hard water formulation, with less (or if using reverse osmosis, use FloraMicro soft water).

Use with Flora Series®:

• Works with all plants and substrates, in hydroponics, soil and outdoor gardening.
• After nutrients, the biggest boost advantage can give any grow is using a high quality Fulvic acid: GHE Diamond Nectar® is the best.
• FloraKleen®: not just for lock-out problems and harvest: FloraKleen® optimises substrate health and mineral availability in even the best run grow.
• For the last 10 days use Ripen® alone for increased flower production.

Flora Micro 1 Litre GHE

General Hydroponics (GH) Flora Micro SW is part of the GH 3-part Flora base nutrient formula and this version of Flora Micro is designed especially for use in soft water (SW) areas. The GH Flora Micro part promotes strong root growth and flowering. Use in combination with GH Flora Gro and Flora Bloom to make a top-notch nutrient.   General Hydroponics – one of the original hydroponic nutrient companies GH constantly conducts research and continually improves it’s products GH Flora – a long-standing and continually updated 3-part formula for hydroponics Flora Micro part provides micronutrients and pH buffers Use in combination with Flora Gro and Bloom for a complete nutrient Flora Micro SW version designed for soft water areas Works great with the GH range of additives and boosters General Hydroponics Flora Micro SW 1 Litres contains: 1 Litres of General Hydroponics Flora Micro SW How General Hydroponics Flora Micro SW works: The General Hydroponics 3-part, mineral-based nutrient system was introduced many years ago and is still in use today by thousands of growers world-wide. General Hydroponics constantly conducts research and then updates it’s products according to their findings on a regular basis. Flora Micro SW is designed to be used along with Flora Gro and Flora Bloom to make a complete nutrient. The SW version is designed for use in soft water areas. A version for hard water (HW) areas is also available. Using different ratios of each of the 3 parts in different stages of growth produces a complete nutrient that’s perfectly adapted to each part of your grow. Flora Micro provides micronutrients and pH buffers to help stabilise the solution. GH Flora nutrients work perfectly in hydroponics, aeroponics and coco. GH 3-part Flora nutrients also work well in soil but the strength should be approximately two thirds of that used in hydroponic situations. Using General Hydroponics Flora Micro SW: Use General Hydroponics Flora Micro along with Flora Gro and Flora Bloom to make a nutrient solution that’s perfectly tailored to the particular growth stage of your plants. Always shake the bottles well before use. Using the guide below, add the appropriate amount of each part to your reservoir, mixing well in-between adding each part. Adjust the strength of the solution to the recommended CF and then adjust the pH if necessary. We recommend that the nutrient solution is replaced every 7 days. As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. Manufacturer's recommended dosage rates are only for vigorously growing plants that are in the peak of health. Slower growing plants and those that are not 100% healthy will require a lower dosage rate. Learn more about how to control nutrient strength and pH levels in hydroponics in our blog guides: Control of Nutrient Strength Levels in Hydroponics and pH Control in Hydroponics General Hydroponics Flora 3-part nutrient recommended pH range: 5.5 – 6.2 Basic recommended feeding guide: Early Veg Stage: 0.25ml/litre Gro + 0.25ml/litre Micro + 0.25ml/litre Bloom. CF: 4 – 6 Late Veg Stage: 0.7ml/litre Gro + 0.7ml/litre Micro + 0.7ml/litre Bloom. CF: 12 – 15 First 2 weeks of flowering: 1.5ml/litre Gro + 1.0ml/litre Micro + 0.5ml/litre Bloom. CF: 15 – 22 Weeks 3-7 of flowering: 0.5ml/litre Gro + 1.0ml/litre Micro + 1.5ml/litre Bloom. CF: 15 – 22 Last week of flowering: Flush or use GH Ripen GH Flora Gro NPK: 3 – 1 – 7 GH Flora Bloom NPK: 0 – 5 – 4 GH Flora Micro (both HW & SW versions) NPK: 5 – 0 – 1

Flora Micro 5 Litre GHE

General Hydroponics (GH) Flora Micro SW is part of the GH 3-part Flora base nutrient formula and this version of Flora Micro is designed especially for use in soft water (SW) areas. The GH Flora Micro part promotes strong root growth and flowering. Use in combination with GH Flora Gro and Flora Bloom to make a top-notch nutrient.   General Hydroponics – one of the original hydroponic nutrient companies GH constantly conducts research and continually improves it’s products GH Flora – a long-standing and continually updated 3-part formula for hydroponics Flora Micro part provides micronutrients and pH buffers Use in combination with Flora Gro and Bloom for a complete nutrient Flora Micro SW version designed for soft water areas Works great with the GH range of additives and boosters General Hydroponics Flora Micro SW 5 Litres contains: 5 Litres of General Hydroponics Flora Micro SW How General Hydroponics Flora Micro SW works: The General Hydroponics 3-part, mineral-based nutrient system was introduced many years ago and is still in use today by thousands of growers world-wide. General Hydroponics constantly conducts research and then updates it’s products according to their findings on a regular basis. Flora Micro SW is designed to be used along with Flora Gro and Flora Bloom to make a complete nutrient. The SW version is designed for use in soft water areas. A version for hard water (HW) areas is also available. Using different ratios of each of the 3 parts in different stages of growth produces a complete nutrient that’s perfectly adapted to each part of your grow. Flora Micro provides micronutrients and pH buffers to help stabilise the solution. GH Flora nutrients work perfectly in hydroponics, aeroponics and coco. GH 3-part Flora nutrients also work well in soil but the strength should be approximately two thirds of that used in hydroponic situations. Using General Hydroponics Flora Micro SW: Use General Hydroponics Flora Micro along with Flora Gro and Flora Bloom to make a nutrient solution that’s perfectly tailored to the particular growth stage of your plants. Always shake the bottles well before use. Using the guide below, add the appropriate amount of each part to your reservoir, mixing well in-between adding each part. Adjust the strength of the solution to the recommended CF and then adjust the pH if necessary. We recommend that the nutrient solution is replaced every 7 days. As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. Manufacturer's recommended dosage rates are only for vigorously growing plants that are in the peak of health. Slower growing plants and those that are not 100% healthy will require a lower dosage rate. Learn more about how to control nutrient strength and pH levels in hydroponics in our blog guides: Control of Nutrient Strength Levels in Hydroponics and pH Control in Hydroponics General Hydroponics Flora 3-part nutrient recommended pH range: 5.5 – 6.2 Basic recommended feeding guide: Early Veg Stage: 0.25ml/litre Gro + 0.25ml/litre Micro + 0.25ml/litre Bloom. CF: 4 – 6 Late Veg Stage: 0.7ml/litre Gro + 0.7ml/litre Micro + 0.7ml/litre Bloom. CF: 12 – 15 First 2 weeks of flowering: 1.5ml/litre Gro + 1.0ml/litre Micro + 0.5ml/litre Bloom. CF: 15 – 22 Weeks 3-7 of flowering: 0.5ml/litre Gro + 1.0ml/litre Micro + 1.5ml/litre Bloom. CF: 15 – 22 Last week of flowering: Flush or use GH Ripen GH Flora Gro NPK: 3 – 1 – 7 GH Flora Bloom NPK: 0 – 5 – 4 GH Flora Micro (both HW & SW versions) NPK: 5 – 0 – 1

Flora Micro 10 Litre GHE

General Hydroponics (GH) Flora Micro SW is part of the GH 3-part Flora base nutrient formula and this version of Flora Micro is designed especially for use in soft water (SW) areas. The GH Flora Micro part promotes strong root growth and flowering. Use in combination with GH Flora Gro and Flora Bloom to make a top-notch nutrient.   General Hydroponics – one of the original hydroponic nutrient companies GH constantly conducts research and continually improves it’s products GH Flora – a long-standing and continually updated 3-part formula for hydroponics Flora Micro part provides micronutrients and pH buffers Use in combination with Flora Gro and Bloom for a complete nutrient Flora Micro SW version designed for soft water areas Works great with the GH range of additives and boosters General Hydroponics Flora Micro SW 10 Litres contains: 10 Litres of General Hydroponics Flora Micro SW How General Hydroponics Flora Micro SW works: The General Hydroponics 3-part, mineral-based nutrient system was introduced many years ago and is still in use today by thousands of growers world-wide. General Hydroponics constantly conducts research and then updates it’s products according to their findings on a regular basis. Flora Micro SW is designed to be used along with Flora Gro and Flora Bloom to make a complete nutrient. The SW version is designed for use in soft water areas. A version for hard water (HW) areas is also available. Using different ratios of each of the 3 parts in different stages of growth produces a complete nutrient that’s perfectly adapted to each part of your grow. Flora Micro provides micronutrients and pH buffers to help stabilise the solution. GH Flora nutrients work perfectly in hydroponics, aeroponics and coco. GH 3-part Flora nutrients also work well in soil but the strength should be approximately two thirds of that used in hydroponic situations. Using General Hydroponics Flora Micro SW: Use General Hydroponics Flora Micro along with Flora Gro and Flora Bloom to make a nutrient solution that’s perfectly tailored to the particular growth stage of your plants. Always shake the bottles well before use. Using the guide below, add the appropriate amount of each part to your reservoir, mixing well in-between adding each part. Adjust the strength of the solution to the recommended CF and then adjust the pH if necessary. We recommend that the nutrient solution is replaced every 7 days. As with all nutrients, boosters and additives, never mix them together in their concentrated form (i.e. straight out of the bottle). Always add each nutrient, booster or additive to your reservoir or feed water in turn, giving the solution a good stir to mix it in before adding the next one. Manufacturer's recommended dosage rates are only for vigorously growing plants that are in the peak of health. Slower growing plants and those that are not 100% healthy will require a lower dosage rate. Learn more about how to control nutrient strength and pH levels in hydroponics in our blog guides: Control of Nutrient Strength Levels in Hydroponics and pH Control in Hydroponics General Hydroponics Flora 3-part nutrient recommended pH range: 5.5 – 6.2 Basic recommended feeding guide: Early Veg Stage: 0.25ml/litre Gro + 0.25ml/litre Micro + 0.25ml/litre Bloom. CF: 4 – 6 Late Veg Stage: 0.7ml/litre Gro + 0.7ml/litre Micro + 0.7ml/litre Bloom. CF: 12 – 15 First 2 weeks of flowering: 1.5ml/litre Gro + 1.0ml/litre Micro + 0.5ml/litre Bloom. CF: 15 – 22 Weeks 3-7 of flowering: 0.5ml/litre Gro + 1.0ml/litre Micro + 1.5ml/litre Bloom. CF: 15 – 22 Last week of flowering: Flush or use GH Ripen GH Flora Gro NPK: 3 – 1 – 7 GH Flora Bloom NPK: 0 – 5 – 4 GH Flora Micro (both HW & SW versions) NPK: 5 – 0 – 1