6.5A Smart Controller Mk2 SMSCOM


    Smart Controller Mk2 - 6.5A Single Fan Speed Controller (No Temp. Sensor) SMSCOM



    NTC - Temp. Sensor for 6.5A Smart Controller Mk2 SMSCOM



Product Description

SMSCOM 6.5A Smart Controller Mk2

The SMSCOM 6.5A Smart Controller Mk2 used without the temperature sensor, acts as a basic manual fan speed controller giving you 60 different speed settings.

With the temperature sensor (NTC) attached, the SMSCOM 6.5A Smart Controller Mk2 is designed to maintain a constant temperature inside your room whilst keeping airflow under control at all times. Once you have set your desired temperature level, the Smart Controller will automatically create the perfect climate.

How it Works:

The Smart Controller uses our Motion Flow software system; therefore, it reacts completely differently to the usual types of controllers. When you first install the Smart Controller, it requires 5-10 minutes to scan your room to make an evaluation for the correct running speed for you fan. After this time, the controller knows the exact speed your fan needs to run to maintain the temperature. From then on, the Smart Controller will make automatic adjustments to the fan's speed to always maintain the set temperature.

The Smart Controller has 60 different speed settings, meaning fan speed control is very smooth and temperature control is the most accurate out of any type of controller.
As well as highly accurate temperature control, this new technology ensures less fan noise and a longer life for your fan. The Smart Controller is plug and play, so no wiring is needed. Just plug in your fan, set the desired temperature and minimum fan speed, and the Smart Controller will take care of the rest.

  • Regulates fan speed
  • Motion Flow software means continuous regulation
  • Plug-and-play (Plugs straight into a mains socket)
  • Max. capacity 6.5 A (1500w)
  • 5 year warranty
  • Upgradeable with the addition of the plug-in SMSCOM thermostat
  • Automatic if used with NTC

SMSCOM NTC - Temp. Sensor for 6.5A Smart Controller Mk2

The SMSCOM NTC - Temp. Sensor is used to upgrade the basic 6.5A Smart Controller Mk2 so it can act completely independently, keeping your room to user set parameters with a fan speed minimum, making it incredibly easily to give your plants the perfect environment.

  • Upgrades your standard 6.5A Smart Controller Mk2
  • 3m long temperature sensor
  • Can be used as a direct replacement for a damaged or faulty sensor
  • Easy installation

How to Use:

  • Plug the temperature probe in the 6.5A Smart Controller Mk2 **1
  • Plug the Smart Controller into an electrical outlet
  • Place the Temperature Sensor in the centre of your room
  • Connect your fan to the Smart Controller
  • Set your desired minimum fan speed**
  • Set your desired temperature

**1 without probe the Smart Controller operates like a basic manual fan controller.
**Minimum Fan Speed: This is the lowest speed that the fan will run at. The lower this speed is set, the greater range your fan has to operate between. We recommend this is set to its lowest setting. This means the fan will run anywhere between a slow speed and full speed to keep the temperature constant. Adjustments to the lowest speed can be made to suit your fan type if necessary.

Smart Controller Mk2 - 6.5A Single Fan Speed Controller (No Temp. Sensor) SMSCOM

SMSCOM Smart Controller Mk2 - 6.5A Single Fan Speed Controller (No Temp. Sensor)

NTC - Temp. Sensor for 6.5A Smart Controller Mk2 SMSCOM

SMSCOM NTC - Temp. Sensor for 6.5A Smart Controller Mk2

Shipping & Handling

Shipping & Handling

THS uses a selection of couriers to deliver our products to N.Ireland, Ireland, the UK and EU at the fairest rates we can negotiate.

Here's what you can expect when placing an order with THS:

Upon purchase, your order will be packaged and mailed without delay and sent to the cardholder’s address. We will always endeavour to deliver in the fastest most economical way, when shipping within Ireland and the UK.

Overseas shipment times can vary greatly, it’s advised to contact us for specific international shipping quotes.

All goods are subject to availability and a delay in delivery can sometimes be out of our control. We will do our best to ameliorate and avoid these delays whenever we can so that your order can be delivered in a timely manner. Delivery times are approximate and we shall not be held liable for any losses, damages, expenses or charges caused by any delay from the delivery of goods.

For further information please check the delivery page on the website.



We accept a variety of different payment options to allow our customers to pay in whatever method is most convenient for them. We accept Credit Cards, Debit Cards, PayPal, Bank Transfers, Cash in-store, Bitcoin, and Telephone orders.

To process your payment over the phone, call:

UK: +44 2890 994199

For online payments including Bank Transfer, Credit or Debit cards, PayPal, Bitcoin simply process your order and follow the instructions at checkout. Our credit card transactions are completed on secure and encrypted communications via 3rd party payment processing services.

For further information please check the payment page on the website.