Gavita Master EL1F Gen 2

Control up to 80 x Gavita e-series lights with an EL Gavita Master Controller - Gen 2.

No timers, contactors & switchboards are needed! You can control all ballasts at once with a couple clicks.

EL1: 40 lights, 1 room, 1 temp sensor
EL2: 80 lights, 2 rooms, 2 temp sensors, 2 ECMs (connects to heaters, CO₂ equipment, etc)

If you opt for EL2, you can run both rooms on the same, separate or overlapping light cycles.

• Up to 80 x Gavita lights
• Dims & Boosts in 10W increments (from 50% - 115%)
• Connects with 2 other devices (e.g. humidifier) - EL2 Only

• Sunrise & Sunset Mode

  Switch to Sunrise & Sunset mode to slowly dim and boost over 30 minutes!

  Dim & Boost Lights In 10W Incremements

  You can adjust the light output of all connected lights in 10W increments (from 50% to 115%)

  No Overheating

  If your grow room gets too hot, auto dim and eventually emergency shut down will kick in.

  You get a warning before, and a notification after this happens.

  No High Inrushes

  All ballasts stay in standby mode until they get a signal from the controller to switch on.

  Event Logging

  You check temperature highs and lows, last autodims, last autoshutdown and more.

  Choose Your Display

  Output: % or watts - Temperature: Celsius or Fahrenheit - Time: 24hr or AM/PM

  External Contactor Modules (EL2 Only)

  You can connect 2 extra bits of kit to your controller then choose whether they switch on or off.

  Easy To Use

  Everything's plug & play.

   

  The Tech
  	EL1	EL2
  Max no of Lights	40	80
  Lighting Control	50 - 115%	50 - 115%
  Number of Rooms	1	2
  External Contactor Modules (ECMs)		2 optional (connects CO2 equipment, heaters, etc)
  Alarm contacts		2, nc/no
  Temperature sensors	1	2 (1 per room)

   

  Extras (must be bought separately)
  ECM1	External contactor modules
  B200 Boosters	Maximum of 3 per port